Shopping Cart
There are no more items in your cart
Clipper Accessories
There are no products.
How often should I oil my clipper blades?
For professional use: a few drops of clipper oil on the blade before every use and after every cleaning. For home use: once a week or every 3–4 haircuts. Oiling isn't just maintenance — it reduces friction, keeps the blade sharp longer, and prevents heat build-up that damages hair and irritates the scalp. The most common cause of premature blade wear is running clippers dry without lubrication.
Clipper combs or guards — what's the difference and which do I need?
Technically they're the same thing: plastic attachments that sit over the blade to set the cutting length. The guard number corresponds to a length: #1 = 3mm, #2 = 6mm, #3 = 9mm and so on. If you're looking for replacement guards for a specific clipper, check compatibility first — not all combs fit all models. Universal sets cover most clippers but with a less precise fit than original brand attachments.
When should I replace clipper blades?
The signs are specific: the clipper pulls hair instead of cutting it cleanly, leaves lines or uneven patches, or requires multiple passes over the same area. Regular oiling significantly extends blade life — for all-day professional use, blade replacement every 6–12 months is a standard routine depending on usage intensity. If you're oiling consistently and still getting poor results, the blade has worn past its effective cutting edge.
How do I clean a clipper properly after use?
Three steps: first, remove the blade (if detachable) and use the cleaning brush to clear cut hair from the teeth. Second, apply a cleaning and disinfectant spray to the blade — essential in a professional setting between clients. Third, oil before storing. Never run water directly over a clipper that isn't waterproof-rated — it damages the motor. A quick post-use clean takes under a minute and keeps the tool performing consistently.
Does a clipper holder actually make a difference to how I work?
Yes — a clipper holder isn't just about tidiness. Storing your clipper on a holder or wall mount keeps it away from surfaces where dust and hair debris accumulate, prevents drops that can knock the blade out of alignment, and keeps the cord unkinked and positioned correctly. In a professional workspace, the practical benefit is speed: the tool is always exactly where you expect it, which matters when you're moving between clients throughout the day.
Are clipper accessories universal or do I need brand-specific products?
It depends on the accessory. Lubricating oils and cleaning brushes are universal — they work with any clipper brand. Guard combs and replacement blades are usually brand-specific: Wahl, Andis, Oster, and Panasonic all use different attachment systems. If you're buying guards, check compatibility with your exact model before purchasing. For oils and brushes, any quality product works equally well regardless of what brand clipper you're using.
Where can I order clipper accessories with shipping across Europe?
At HairMaker.Gr you'll find a curated selection of clipper accessories — oils, guard combs, cleaning brushes, and clipper holders — for professional and home use, with shipping across Greece and throughout Europe.
Clipper Accessories | Maintenance, Precision & Blade Life
Clipper accessories determine how well — and how long — your hair clippers perform. Blade oil, cleaning brushes, guard combs, replacement blades, clipper holders — each solves a specific problem: blade wear, hygiene between clients, precise cutting length, organised workspace. Without regular maintenance, even a high-end clipper loses performance quickly and becomes a liability rather than an asset.
The most critical accessory for daily use is clipper blade oil: it reduces friction between blade teeth, prevents heat build-up that damages hair and irritates the scalp, and significantly extends blade life. In practical terms: a barber who oils consistently replaces blades far less often — and every cut feels smoother for the client because the blade is running at optimal temperature and sharpness throughout the session.
In the Clipper Accessories category you'll find everything needed to keep your clippers in top condition — from oils and cleaning sprays to guard combs for every cutting length and holders for an organised workstation. Proper maintenance equipment is as important as the clipper itself: it protects your investment and keeps your results consistent every single cut.
What This Category Includes
- Clipper blade oil — reduces friction, prevents overheating, extends blade sharpness and lifespan
- Guard combs / clipper combs — set precise cutting lengths (#1–#8), universal and brand-specific options
- Cleaning brushes — remove cut hair from blade teeth after every use, essential for hygiene
- Clipper holders / storage stands — organised workspace, blade protection, cord management
Related Categories
👉 Trimmer
Συχνές Ερωτήσεις & Απαντήσεις
For professional use: a few drops of clipper oil on the blade before every use and after every cleaning. For home use: once a week or every 3–4 haircuts. Oiling isn't just maintenance — it reduces friction, keeps the blade sharp longer, and prevents heat build-up that damages hair and irritates the scalp. The most common cause of premature blade wear is running clippers dry without lubrication.
Technically they're the same thing: plastic attachments that sit over the blade to set the cutting length. The guard number corresponds to a length: #1 = 3mm, #2 = 6mm, #3 = 9mm and so on. If you're looking for replacement guards for a specific clipper, check compatibility first — not all combs fit all models. Universal sets cover most clippers but with a less precise fit than original brand attachments.
The signs are specific: the clipper pulls hair instead of cutting it cleanly, leaves lines or uneven patches, or requires multiple passes over the same area. Regular oiling significantly extends blade life — for all-day professional use, blade replacement every 6–12 months is a standard routine depending on usage intensity. If you're oiling consistently and still getting poor results, the blade has worn past its effective cutting edge.
Three steps: first, remove the blade (if detachable) and use the cleaning brush to clear cut hair from the teeth. Second, apply a cleaning and disinfectant spray to the blade — essential in a professional setting between clients. Third, oil before storing. Never run water directly over a clipper that isn't waterproof-rated — it damages the motor. A quick post-use clean takes under a minute and keeps the tool performing consistently.
Yes — a clipper holder isn't just about tidiness. Storing your clipper on a holder or wall mount keeps it away from surfaces where dust and hair debris accumulate, prevents drops that can knock the blade out of alignment, and keeps the cord unkinked and positioned correctly. In a professional workspace, the practical benefit is speed: the tool is always exactly where you expect it, which matters when you're moving between clients throughout the day.
It depends on the accessory. Lubricating oils and cleaning brushes are universal — they work with any clipper brand. Guard combs and replacement blades are usually brand-specific: Wahl, Andis, Oster, and Panasonic all use different attachment systems. If you're buying guards, check compatibility with your exact model before purchasing. For oils and brushes, any quality product works equally well regardless of what brand clipper you're using.
At HairMaker.Gr you'll find a curated selection of clipper accessories — oils, guard combs, cleaning brushes, and clipper holders — for professional and home use, with shipping across Greece and throughout Europe.